Back

The new green number

Barco is the global leader in laser projection with the broadest range of flagship laser and laser phosphor (LP) projectors for cinema and non-cinema applications. One of the foundations for this leadership is a commitment to utilizing laser technologies, architectures and components that minimize overall “wall plug” power consumption, and thus the exhibitor’s cost of electrical power.

Barco’s flagship laser cinema product line is designed to deliver unprecedented image quality and brightness over its very long lifetime, while its laser phosphor projectors feature very low operating cost and simplified operation. In addition, the new HDF-W30LP FLEX large venue projector achieves record brightness levels for a laser phosphor architecture. All benefit from Barco’s strategic commitment to provide laser light sources that dramatically reduce 'wall plug' power consumption.

The ‘new green number’ = lumens per watt

The ‘figure of merit’ for a projector’s power efficiency is straightforward: lumens per watt (lm/W), what you ‘get’ divided by what you 'pay for'. But let’s make this metric totally clear so that different technologies, models, and brands can be rigorously compared.

To determine what the user is paying for, we start by measuring white-balanced, color-corrected lumens in the required color space. Next, we need to capture all the wall plug power the user has to pay for - so any cooling system and electronics power requirements should be included with the laser or LP light source power consumption. Finally, we can compare the lm/W of a new projector or its average output over the life of the light source. Fixing the details of the measurement allows us to compare different projectors.

Why laser illumination is more efficient

In general, laser light sources are inherently more efficient than lamps for projection. This is because the usable output of any projector illumination source is constrained by the optical (étendue) limits and color space of the system. No matter how efficiently light is generated, any portion that cannot be fully coupled through the projector optics, or that exceeds the required gamut will be wasted.

The infographic below describes the power conversion losses from the wall-plug to the screen.

Power requirements and the cascade of electrical to optical conversion efficiencies and losses:

  • Power supply losses

  • Laser device Electrical to Optical (E to O) conversion losses

  • Sub optimum laser luminous efficacy (lm/optical watt) at white balance

  • Power required for cooling (air; fluid; chillers, pumps and fans)

  • Power for electronics, infrastructure and control

  • Optical losses through the system, such as absorption, scatter, diffraction, Fresnel ‘back reflection’ off of all optical surfaces

Power supplies that convert standard wall plug voltages to the required voltages for lamp or laser sources are never 100% efficient - Loss number 1.

Lasers output light with very high spatial brightness, that is, ‘collimated’. These beams emanate from a very small ‘spot’ and diverge very little. This is one of the fundamental characteristic of lasers that makes them very well suited for high-brightness projectors. A lot of light can be coupled into and through a given projector and chip size. Using laser illumination can increase the transmission efficiency and maximum output of the system.

Monochromatic lasers

Unlike lamps, lasers are nearly monochromatic: they output a particular color. Supplying only the colors required for the desired color space eliminates wasted power. No UV, or IR or Yellow or Cyan light needs to be blocked and wasted. Only Red, Green and Blue (RGB) light is needed so only RGB light is supplied.

Lasers operate at much lower temperatures than lamps, but they still need to be cooled and ideally, kept at an optimum temperature. Careful thermal management does maximize output, efficiency, lifetime and overall reliability, but it takes power to keep the laser engine, and in the case of super-bright projectors, the chips and optics cool.

So using laser devices that have high ‘E to O’ (electrical to optical) conversion efficiency provides a double benefit, first by maximizing the optical watts out for the electrical watts in, and second, by minimizing the cooling required by reducing the wasted heat.

Luminous efficacy

The most important laser-specific efficiency metric is called luminous efficacy, that is, the lumens per optical watt for a given wavelength. Theoretically, there is an optimum combination of RGB laser wavelengths for a given color space and white point that will maximize white-balanced lumens per combined RGB watt. However, factors such as device E to O conversion efficiency cost per optical watt, wavelength availability and 6 primary 3D combine to make wavelength selection an extremely complex optimization. The topic of primary selection vs. color space vs. wall plug efficiency will be treated in greater detail in future blog posts.

Some green numbers from the real world

The table below illustrates the green number for three different laser (RGB) or laser phosphor (LP) illuminated projectors and their lamp-illuminated counterparts.

All of Barco’s laser-illuminated projector lines produce more lumens per watt than their lamp-based counterparts. For the same color space, laser phosphor is slightly more efficient than RGB. Laser phosphor for Rec. 709 is even higher due in part to a higher luminous efficacy of the primaries for this color space.

Cooling and laser light source lifetime

The DP4K-L series is remarkably efficient considering that its wall plug power consumption includes the chillers specifically designed to keep its lasers, chips and optics cool for maximum brightness, reliability, and efficiency. It also assures more than a 30,000 hour-light source lifetime (7-10 years for cinema) with less than 20% roll-off. This ‘lifetime’ factor tradeoff must also be considered as part of the product selection process.

Barco’s early commitment to efficient solid-state light sources as a platform-technology is now enabling a rapid roll-out of numerous new cinema and non-cinema laser projectors. In the coming year, you will see these technologies improve the efficiency of projectors for cinema, events, mapping, rental/staging, control rooms, VR, 3D auto design and other application segments - providing the optimum combination of image quality, operational simplicity, lower operating costs and a much higher ‘green number.

Related products DP4K-60L DP4K-45L DP4K-30L DP4K-22L DP2K-15CLP DP2K-20CLP HDF-W30LP FLEX

#Barco

Interested in products?...

 

Send us the request!

Highlights
Articles